Kera Link Tools

Keratin Bond Remover - Clip In Hair
$12.00
In Stock
Although extensions can last a long time, they can't stay in forever and it's always a sad day when they must come out. Minimize the frustration by making sure they're removed with the right products. Kera-Link Extensions need Clip In's Kera-Link Bond Remover to break down the bond quickly and gently without damaging hair. Because it's alcohol-based, Keratin Bond Remover doesn't make hair slippery, so you don't need to worry as much about clarifying. Only a small amount is needed for each extension strand, so each bottle lasts a long time. Apply it to the keratin bond and make sure the entire bond is covered in the Bond Remover. Let it set for a few seconds, then use your hair extension tool to squeeze the bond until it cracks and breaks. Then the Kera-Link strand should slip right off the hair. After the extensions are removed, wash hair. Using Clip In...
Rebonds - Clear - Clip In Hair
$7.00
In Stock
When it's time to tighten or reuse Kera-Link hair, use Clip In Rebonds. They're made with 100% keratin and are fused to hair with the Melting Connector for a smooth finish. Rebonds can be placed on top of old bonds or on strands whose old keratin bonds have been cut off. Rebonds can be used to tighten  Kera-Link extensions, moving them closer to the scalp. Also available in Black and Brown. When rebonds are heated, color may fade to a chalk color. Using Clip In hair extension accessories guarantees that both original hair and the hair extensions are treated properly and last a long time. Our bonds are designed to work with Clip In hair and the Clip In Melting Connector; we recommend only using our products for the best results.
Rebonds - Brown - Clip In Hair
$7.00
In Stock
When it's time to tighten or reuse Kera-Link hair, use Clip In Rebonds. They're made with 100% keratin and are fused to hair with the Melting Connector for a smooth finish. Rebonds can be placed on top of old bonds or on strands whose old keratin bonds have been cut off.   Rebonds can be used to tighten  Kera-Link extensions, moving them closer to the scalp. Also available in Clear and Black. When rebonds are heated, color may fade to a chalk color. Using Clip In hair extension accessories guarantees that both original hair and the hair extensions are treated properly and last a long time. Our bonds are designed to work with Clip In hair and the Clip In Melting Connector; we recommend only using our products for the best results.
Rebonds - Black - Clip In Hair
$7.00
In Stock
When it's time to tighten or reuse Kera-Link hair, use Clip In Rebonds. They're made with 100% keratin and are fused to hair with the Melting Connector for a smooth finish. Rebonds can be placed on top of old bonds or on strands whose old keratin bonds have been cut off. Rebonds can be used to tighten  Kera-Link extensions, moving them closer to the scalp Also available in Clear and Brown. When rebonds are heated, color may fade to a chalk color. Using Clip In hair extension accessories guarantees that both original hair and the hair extensions are treated properly and last a long time. Our bonds are designed to work with Clip In hair and the Clip In Melting Connector; we recommend only using our products for the best results.
Melting Connector - Clip In Hair
$40.00
In Stock
Use the Melting Connector to fuse Kera-link Hair Extension bonds to hair. It's hot enough to melt the bonds, but gentle enough that it won't damage hair. Place the bond underneath a small section of the client's hair and then squeeze between plates of the Melting Connector. With the applied heat, the bond fuses to hair for a secure strand-by-strand hold. Kera-Link Hair Extensions look and feel natural because they're fused right to the hair, and since they blend right in, they're hard to see. When it comes time to remove the bonds, our Keratin Bond Remover breaks and softens bonds so they slide out easily, without damaging hair. The small melting plates are designed to perfectly fit our keratin bonds, so using them together makes installation easy. Using Clip In hair extension accessories guarantees that both original hair and the hair extensions are treated properly and last a long...
Protector Strip - Clip In Hair
$9.00
In Stock
Clip In's Protector Strip was designed to help stylists create impeccable hair extensions. It shields against keratin residue from the bonds, and against the heat from the Kera-Link Melting Connector. It also acts as a guide for the stylist as they pull the hair through in even increments across the head.  The strip can be cut to fit the width of the client's head. Clip the strip, ensuring the opening's placed just under the hair part. Pull the hair through, making sure each section is even and falls naturally. Using Clip In hair extension accessories guarantees that both original hair and the hair extensions are treated properly and last a long time. Our Protector Strip is designed to work with Clip In hair and the Kera-Link Melting Connector; we recommend only using our products for the best results.
Protector Disks - Clip In Hair
$9.00
In Stock
Use Clip In protector disks while installing Kera-Link Hair Extensions to keep surrounding hair clean and protected. Simply clip the disk to hair, right at the part line where the extensions are going to be installed. Pull a strand of hair through that matches the size and weight of the extension weft. Bond the keratin as directed, and the disk will protect and steady hair. When the bond is finished, slide the hair out through the slit. Protector Disks make Kera-Link easier to install. They're reusable and come in a pack of 10. Using Clip In hair extension accessories guarantees that both original hair and the hair extensions are treated properly and last a long time. Our products are designed to work with Clip In hair and bonds; we recommend only using our products for the best results.
Connector Belt - Black - Clip In Hair
$15.00
In Stock
Speed up your Kera-Link installations with Clip In’s first-of-its-kind Connector Belt—a heat-resistant silicone pouch that firmly holds your active Melting Connector safely at your hip as you work. Simply fasten the Connector Belt to your waist with the adjustable strap, then place your Melting Connector inside when you need a free hand during installation. The silicone structure acts as an insulator, keeping the heat inside and away from your skin or clothing. Best part is, you won’t need to set your Melting Connector down on the countertop anymore; the Melting Connector will now move with you, staying within arm’s reach at all times.
Connector Belt - Pink - Clip In Hair
$15.00
In Stock
Speed up your Kera-Link installations with Clip In’s first-of-its-kind Connector Belt—a heat-resistant silicone pouch that firmly holds your active Melting Connector safely at your hip as you work. Simply fasten the Connector Belt to your waist with the adjustable strap, then place your Melting Connector inside when you need a free hand during installation. The silicone structure acts as an insulator, keeping the heat inside and away from your skin or clothing. Best part is, you won’t need to set your Melting Connector down on the countertop anymore; the Melting Connector will now move with you, staying within arm’s reach at all times.
Keratin Bond Cutters - Clip In Hair
$25.00
In Stock
The Keratin Bond Cutter is a new, innovative Clip In tool specifically designed to help stylists cut the bonds of Keratin Hair Extensions during the pre-installation process. Cutting Keratin bonds can give smaller, more flexible pieces that are easier to install and result in a more natural, disguised look for the client. The Keratin Bond Cutter is a superior option over using shears to cut and shape bonds. Its sharp metal pinchers cleanly cut through any bond, without damaging the hair itself. Plus, the angle of the cutters ensure that the bond doesn’t fly away or shoot out after clipping. This tool give you total control with no mess! Keratin Bond Cutters Features • Ergonomic, easy-to-grip handle • High-quality stainless steel • Double spring for more control & a smoother cut • Clean, sharp edges for precise cut • Spacious area for bond head • Wide edge to cut bond...
Keratin Cleaning Kit - Cleaner, Microfiber Cloth, Tool Pouch - Clip In Hair
$16.00
In Stock
Refresh your long-used Kera-Link tools with this Keratin Cleaning Solution—a skin-safe, citrus oil-based formula designed to break down keratin residue for a quicker cleaning process. To use, spritz some of the Keratin Cleaning Solution onto a microfiber cloth and rub over target areas. Once keratin residue is removed, wash the solution off with soap and water. Make sure that your Melting Connector is unplugged and sufficiently cool before attempting to clean it. Ingredients: Citrus Oils, Petroleum Hydrocarbons, Lanolin, Fragrance.
Cordless Melting Connector
$75.00
In Stock
Kera-Link Cordless Melting Connector has the same superior power as the original, reaching 210° F in 10 seconds. Pair it with our Fusion Connector Belt for your fastest Kera-Link installation ever. The Clip In Cordless Melting Connector requires at least 8 hours for a full charge. The Cordless Melting Connector battery lasts 1.5-3 hours before needing to be charged. The highest temperature the Cordless Melting Connector reaches is 356℉ . It takes about 2-3 minutes for the Cordless Melting Connector to reach the maximum temperature. It takes about 15 minutes for the Cordless Melting Connector to cool down after being powered off. The LED light will go out indicating the need to recharge the battery. The Cordless Melting Connector will automatically power off after 3 hours not in use. Use the Melting Connector to fuse Kera-link Hair Extension bonds to hair. Place the bond underneath a small section of the...